Dualit Comprehensive Instructions for Milk Frother Models DMF1 and DMF2

KNOW your	DMF1
milk frother

DMF2

A

CLEANING and CARE

Failure to clean your milk frother as per instructions will invalidate your guarantee.

B

A. LID

B.	VEntilation holes
C.	seal
D.	cordless jug
E.	power BUTTON
F.	powerbase
G.	whisk

C

B

1 unplug & cool 2 Remove jug					3 the jug	4 the body
			EN	N
		H
		W
	G			O
U				T
				I
				N
L
P				U
N
				S
U
				E

F

D

E

F

G

Unplug the milk frother before	Remove jug from the	Clean IMMEDIATELY after	Wipe clean with a damp non-
cleaning or maintaining.	powerbase.	each use. Flush out and clean the	abrasive cloth.
		walls using warm soapy water and	do not immerse the
		a non-abrasive cloth. Then dry	jug or powerbase in
		with a soft cloth.	water.

using your milk frother

1 pour in milk iii 2 ATTACH LID 3 on/off

ii i

CLEANING and CARE CONTINUED

5 whisk & lid	6 milk residue	7 do not	8 CAUTION
		immerse

40C

Pour milk into the jug. For heated	For cold frothed milk fill between	Align the lid on the jug as shown	Press the power button to select
milk fill between the minimum	the minimum mark (i)and max	then push down to close.	your required function. Allow
mark (i) and max mark (iii). For	mark (ii).		the heating cycle to finish before
hot frothed milk fill between the			lifting off the power base.
minimum mark (i) and max mark
(ii).

Remove whisk from the jug. The whisk and lid are suitable for dishwasher use. Use a wash cycle below 40oC and place on the top shelf. Remove prior to drying cycle. Ensure the ventilation holes on the lid are unblocked and the seal clean.

A layer of milk may be left in the bottom of the jug. Leave warm soapy water in the jug to soak for 1-2hrs, then wipe off with a non-abrasive cloth.

Never immerse or partially immerse the jug or power base in water. Wipe clean with damp non-abrasive cloth.

Never use sharp objects or an abrasive scourer pad: it will damage the non-stick coating.

Functions

function	action	illumination
hot frothed milk	Press power button once	Solid red
heated milk	Press power button twice	Flashing red
manual turn off	Press power button once	Off
	Remove jug from the base
*cold frothed	Press and hold power	Solid blue
milk	button for 2.5 seconds
manual turn off	Remove jug from the base	Off
auto turn off	At the end of the cycle	Off
	the milk frother will
	automatically turn off

*NB. Cold milk mode can not be selected once hot function is operating. Lift up to turn off. Allow to cool then press and hold for cold function.

Clean after each use. Before making the next round of milk wait approximately 2 minutes.

			EN
		H		N
	G	W		O
U				T
				I
L				N
P				U
N
				S
U				E

hints and tips

•Use cold semi-skimmed or UHT milk for best results. The milk frother works best with milk that has a high protein level. Full fat milk will not froth well (fat content >3.0%). Remember different milks froth at different rates.

•After frothing or heating allow approximately 2 minutes for the thermostat to reset and the milk frother to be ready for use again. To shorten this time, rinse with cold water and wipe dry after each use.

•The milk frother is designed to heat and froth milk. Do not add flavourings, coffee granules or hot chocolate powder.

•Use frothed milk for making cappuccino, latte macchiato, instant frothy coffee.

•Use heated milk for making caffé latte, hot chocolate, instant milky coffee.

•Use cold frothed milk for making milkshakes.