Elo TouchSystems 1525L manual Installation, Usb Connection, 1. Reader Cable and Connector

SECTION 2. INSTALLATION

This section describes the cable connection, the Windows Plug and Play Setup, and the physical mounting of the unit.

USB CONNECTION

Connect the USB cable to a USB port on the host. The Reader, LED Indicator, and pin numbers for the 4-pin connector are shown in Figure 2-1.

1 4

LED Indicator

Figure 2-1. Reader Cable and Connector

Pin numbers and signal descriptions for the cable shown in the illustration are listed in Table 1-1.

Table 2-1. 4-Pin Connector

Pin Number	Signal	Cable Color
1	VCC	Red
2	- Data	White
3	+Data	Green
4	Ground	Black

61