Elo TouchSystems 1525L manual reset, none, set prop val

MagTek Device Drivers for Windows

reset

Function	Reset the device.
Syntax	/reset
Errors	none
Remarks	Clear any pending operations and reset the device to initial state (for mechanized
	card devices this command will also eject the card). This does not affect any of the
Example	properties.
	To return a device to its initial state:
	Command	/reset<LF>
	Response	none
set
Function	Set a property.
Syntax	/set prop val
	prop is one of the valid properties (R/W) shown in Section 2. Properties
	val represents the value of that property.
Errors	none
Remarks	This command is used to define each of the properties that are required prior to
Example	sending a command.
	To load the key serial number in the IntelliPIN:
	Command	/set enc_key_sn 0123456789012345<LF>
	Response	none
ver
Function	Read driver version.
Syntax	/ver
Errors	none
Remarks	The response to this command is sent in the following format: /ver num text
	num is the driver’s part number
	text is a free format version string. It may contain a tagged-format data enclosed
	in parentheses, as shown in this example
Example	This is not the version of the device.
	To determine the version of the currently active driver:
	Command	/ver<LF>
	Response	/ver	30037395	Mag-Tek Device Driver
		(Version=1.04 Model=IntelliPIN)<LF>

112