Elo TouchSystems 1525L manual Connecting the Power Cable, Replacing the Back Cover, Power cable

STEP 5-Connecting the Power Cable

Connectionson underside

AC power cable port

Cable management clip

Power cable

Depending on where you live, you will use either the European or US/Canadian power cable.

•Connect the female end of the power cable to the power port on the touchmonitor.

•Route the cable through the cable management clip.

NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded AC electrical outlet.

STEP 6-Replacing the Back Cover

When all the cables have been connected:

•Replace the back stand cover.

•Power on your PC then your touchmonitor. After a brief pause the picture should appear.

2-11