Elo TouchSystems 1525L manual Configuration Examples for Windows NT/2000/XP

Appendix A. Installation and Setup

Configuration Examples for Windows NT/2000/XP

These examples are for illustration only. Most of the command line entries will have to be modified to accommodate the actual installation.

Device or driver	Command Line	Comment
Generic RS-232	MTCFG COM5 "Generic Serial (RS-	Be sure to specify the proper
	232)" FriendlyName=MT-80	communication parameters for
	UsePort=COM1 baud=4800 parity=0
		the selected device.
	datasize=7
Generic KB	MTCFG COM6 "Generic Wedge	"UsePort" is not required for
	(Keyboard)"	keyboard devices.
	FriendlyName=MagReader
IntelliPIN RS-232	MTCFG COM7 "IntelliPIN MICR	The MICR+ driver must be
	Aux" FriendlyName=IntelliPIN	installed before this driver.
	"UsePort=AUX port on MICR+"
IntelliPIN RS-232	MTCFG COM8 "IntelliPIN RS-232"	Communication parameters
	FriendlyName=PINPad	may be required.
	UsePort=COM2
IntelliPIN KB	MTCFG COM9 "IntelliPIN Wedge"	Quotes are used for Friendly
	"FriendlyName=IntelliPIN KB"	Name to allow the space.
Mag-Wedge	MTCFG COM10 "Mag-Wedge"
	"FriendlyName=Wedge Reader"
MICR+	MTCFG COM11 "MICR+"	Communication parameters
	FriendlyName=MICR+ UsePort=COM1	may be required.
Mini MICR RS-232	MTCFG COM12 "Mini MICR RS-232"	Communication parameters
	FriendlyName=MICRS UsePort=COM1	may be required.
Mini MICR KB	MTCFG COM13 "Mini MICR Wedge"
	FriendlyName=MICRW
MiniWedge	MTCFG COM14 "MiniWedge"
	FriendlyName=MSR
MT-85	MTCFG COM15 "MT-85"	Communication parameters
	"FriendlyName=MSR Encoder"	may be required.
	UsePort=COM2
MT-95	MTCFG COM16 "MT-95"	Communication parameters
	FriendlyName=MT-95 UsePort=COM1	may not be required.
	baud=9600 parity=-1 datasize=8
Port Powered Insert	MTCFG COM17 "Port-powered	No communication parameters
Reader	insert reader"	are required.
	FriendlyName=PPInsert
	UsePort=COM1
Port Powered Swipe	MTCFG COM18 "Port-powered swipe	No communication parameters
Reader	reader" FriendlyName=PPSwipe	are required.
	UsePort=COM2

157