Elo TouchSystems 1525L manual Removing the Drivers W95/98/ME, C\Windows\System, Magcdflt.Hlp

Appendix A. Installation and Setup

Removing the Drivers (W95/98/ME)

Caution

The following assumes familiarity with the Registry Editor. Improper use of the Registry Editor can cause Windows to cease to function. Please follow the instructions carefully.

Complete removal of the drivers requires two steps: (1) remove the drivers from the system using the Device Manager and (2) remove the driver files manually after all devices have been removed by the Device Manager.

To remove the drivers, follow these steps:

1.Stop any applications that are using the drivers. This will insure that all of the ports that are going to be removed are closed.

2.Right-click on My Computer on the desktop or open the Control Panel and double click on the System icon then select Properties.

3.Select the Device Manager tab and click on the plus sign at MagTek.

4.Select the device under the MagTek group and click on Remove. Then click OK. After all device drivers have been removed in this manner, go to step 5.

5.Using Explorer or some other file manager, remove the following driver VXDs from

C:\Windows\System:

GENERIC.VXD

IPIN.VXD

MAGWEDGE.VXD

MICRPLUS.VXD

MINIMICR.VXD

MINIWEDG.VXD

MT85.VXD

MT95.VXD

MTPPINSR.VXD

MTPPSWIP.VXD

The driver files may be removed only if no drivers are currently installed that require them. In particular, the class driver (MAG-TEKCL.VXD) must remain if any device type is still installed. The driver files may be removed when all devices of that particular type have been removed.

6. Remove the support files from C:\Windows\System\. The support files are:

DMAPLD.VXD

DMVXD.VXD

DMVXDD.VXD

MAG-TEKCL.DLL

MAG-TEKCL.VXD

MAGCDFLT.HLP

145