Elo TouchSystems 1525L manual Card Data

Section 4. USB Communications

Item	Value(Hex)
Usage (Card encode type)	09 38
Report Count (7)	95 07
Input (Data, Variable, Absolute, Bit	81 02
Field)
Usage (Track 1 data)	09 30
Report Count (110)	95 6E
Input (Data, Variable, Absolute,	82 02 01
Buffered Bytes)
Usage (Track 2 data)	09 31
Report Count (110)	95 6E
Input (Data, Variable, Absolute,	82 02 01
Buffered Bytes)
Usage (Track 3 data)	09 32
Report Count (110)	95 6E
Input (Data, Variable, Absolute,	82 02 01
Buffered Bytes)
Usage (Command message)	09 20
Report Count (24)	95 18
Feature (Data, Variable, Absolute,	B2 02 01
Buffered Bytes)
End Collection	C0

CARD DATA

Card data is only sent to the host on the Interrupt In pipe using an Input Report. The device will send only one Input Report per card swipe. If the host requests data from the device when no data is available, the device will send a Nak to the host to indicate that it has nothing to send. When a card is swiped, the Input Report will be sent even if the data is not decodable. The following table shows how the input report is structured.

Offset	Usage Name
0	Track 1 decode status
1	Track 2 decode status
2	Track 3 decode status
3	Track 1 data length
4	Track 2 data length
5	Track 3 data length
6	Card encode type
7 – 116	Track 1 data
117 – 226	Track 2 data
227 - 336	Track 3 data

69