Kyocera C8026N manual Error Messages

4.3 Error Messages

4.3Error Messages

The following table lists errors and maintenance messages that you can be dealt with by yourself. If Call service appears, turn off the printer, disconnect the power cord, and contact your Kyocera Mita dealer.

Some errors cause the alarm sound to sound. To stop the alarm sound, press the CANCEL key to stop the alarm sound.

Message	Corrective Action
	The tray indicated in place of ##### has run out of paper. Supply paper to
Add paper ######
	the applicable paper source (paper cassette or MP tray).
	This message is displayed alternately with messages indicating the printer
	status, such as, [Ready], [Please wait], [Processing],
	[Waiting], and [Form Feed Time Out]. If the number of copies to
	print is 2 or more, only the [Add paper] message is displayed.
	The optional finisher is out of staples. Replenish the staples.
Add staples

Add staples

Press GO

Set MP Tray

################

The optional finisher is out of staples. Replenish the staples. To continue printing without stapling, press the GO key.

When this message appears, place paper 2 sheets of the indicated size onto the MP tray and then press the GO key. In order to load the staples in place, the feed unit feeds the paper and the finisher operates without staples. Print- ing resumes automatically after the finisher operates without staples.

Add staples?

The optional finisher is out of staples.

Pressing the ENTER key raises the finisher main tray, so replenish staples. Printing resumes automatically when staples are replenished.

Yes: Press ENTER	Pressing the GO key without replenishing staples continues printing with-
No : Press GO	out stapling.
	A mechanical error has made further printer operation impossible. Make a
Call service
	note of the alphanumeric #### code, turn off power, unplug the printer,
####:0123456
	and contact your Kyocera Mita dealer or service representative.
	The value to the right of the code indicates the total number of pages printed.
	A printer controller error has made further printer operation impossible.
Call service
	Make a note of the F### number, turn off power, unplug the printer, and
F###:
	contact your Kyocera Mita dealer or service representative.
	There is a problem with data transfer between the printer controller and
Call service
	operation panel. Turn off power, unplug the printer, and contact your Kyo-
F000
	cera Mita dealer or service representative.
	The indicated paper cassette is not installed. Correctly install the cassette.
Cassette #
	The indicated cassette number is 1 (topmost) to 5 (bottom). If the optional
not loaded
	duplex drawer is installed, the indicated cassette number is 2 to 5.
	The chad box is full. Empty the chad box.
Chad box full

Check chad box Press GO

Check the condition of the chad box. After ensuring that it is installed cor- rectly, press the GO key.

Table 4-3

4-6