5 | To change the timeout time, press the ENTER key. A | |||
| blinking cursor (_) appears. | |||
|
|
|
|
|
|
| >Form Feed |
| |
|
|
|
|
|
|
| Time Out 000sec. |
| |
6 |
|
|
|
|
Press the U or V key to increase or decrease the | ||||
| value at the blinking cursor and set the desired time. | |||
| The timeout time can be between 0 and 495 seconds, | |||
| in | |||
| move the cursor right and left. | |||
7 | When the desired timeout time is displayed, press the | |||
| ENTER key. | |||
8 |
| To exit the menu selection, press the MENU key. | ||
6
7
8
9
3.13 Other Modes
To turn off the sleep timer, press the ENTER key. A blinking question mark (?) appears.
>>Sleep Mode
? On
Press the U or V key to change On to Off.
>>Sleep Mode
? Off
Press the ENTER key. The sleep timer is turned off.
To exit the menu selection, press the MENU key.
3.13.3Setting the Sleep Timer
The printer has a sleep timer that is used to conserve power when the printer is not printing, processing, or receiving data. You can turn off or on the sleep timer function using the following procedure.
1
2 Press the U or V key repeatedly until Others > appears.
Sleep timer timeout
You can adjust the timer timeout time, the length of time the printer waits before entering sleeping mode in the absence of data. The default sleep timer timeout time is 30 minutes.
The printer reverts to normal operation mode when the printer receives a print job, the operator panel is operated, or one of the exterior covers is opened.
Color calibration is automatically executed before the printer reverts to normal operation
Note mode.
|
| Others | > |
|
3 |
|
|
|
|
Press the Z key. |
|
| ||
4 | Press the U or V key repeatedly until >Sleep | |||
| Timer > appears. |
|
| |
|
|
|
|
|
|
| >Sleep Timer | > |
|
|
| 030 min. |
| |
5 |
|
|
| |
Press the Z key and display >>Sleep Mode. | ||||
|
| >>Sleep Mode |
|
|
|
| On |
|
|
|
|
|
|
|
To confirm and change the timeout time, proceed as follows:
1
2 Press the U or V key repeatedly until Others > appears.
>
3
4 Press the U or V key repeatedly until >Sleep Timer > appears.
