3.13.17 Using High Density Mode
When the high density data such as solid color or a page including many images is continuously printed, the printing density may lower. In such a case, you can prevent the printing density by changing the mode setting to the High Density Mode. However, if you perform the continuous printing in this high density mode, the printing speed will be reduced.
When the RAM disc of the printer is set to effective or a hard disc is attached to the
Note printer, set the RAM disc or the hard disc to ON in the device setting menu of the printer driver. Otherwise, the high density mode will become invalid.
01Standard (Initial setting)
02Printing speed has a priority. Secure the appropri- ate printing density by controlling the reduction of the printing speed.
If the density is a little discolored in the standard printing mode, use this mode.
03Printing density has a priority. The printing den- sity takes priority in printing operation so that the printing speed becomes slower than when 02 is selected.
1 |
| Press the MENU key. |
|
|
2 |
| Press the U or V key repeatedly until Others > | ||
| appears. |
|
| |
|
|
|
|
|
|
| Others | > |
|
|
|
|
|
|
3 |
| Press the Z key. |
|
|
4 | Press the U or V key repeatedly until > Service > | |||
| appears. |
|
| |
|
|
|
|
|
|
| >Service | > |
|
|
|
|
|
|
5 | Press the Z key. | ||
6 | Press the U or V key repeatedly until >> High | ||
| Density Mode appears. | ||
|
|
|
|
|
| >>High Density |
|
|
| Mode 01 |
|
|
|
|
|
|
|
|
|
| 3.13 Other Modes |
7 | Press the ENTER key. A blinking ( ? ) appears | ||||
8 | Press the U or V key to select a number from 01 to | ||||
| 03. |
|
|
| |
|
|
|
|
|
|
|
| >>High |
| Density |
|
|
|
|
| ||
|
|
|
|
|
|
|
| Mode ? 01 |
| ||
9 |
|
|
|
|
|
|
|
|
|
| |
Press the ENTER key. | |||||
10 | Pres the MENU key. The display returns to Ready. | ||||
