Kyocera C8026N manual Arlen ?Agenda, Agenda 0000, Agenda Copies 001, Agenda Delete

7	Press the ENTER key. The user name and the job name
	(Agenda, in this example) entered in the printer driver
	appear with a blinking question mark (?).
			>Arlen
8			?Agenda
	Press the U or V key to display the desired job title.
9	Press the ENTER key. The ID input line appears.
	Enter the four-digit access code entered in the printer
	driver and press the ENTER key.
		>Agenda
			ID
				0000

To enter the ID, press the Y or Z key to move the cursor to the number to be changed and then enter the correct number by pressing the U or V key.

10	You can set the number of copies to be printed. To
	increase the copy count, press the U key; to decrease
	the copy count, press the V key.
		>Agenda
		Copies	00
				1
11
	Press the ENTER key to finalize the copy count. The
	printer prints the specified number of copies for the

job.

Deleting a private/stored job

You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off after printing, but jobs saved using Stored Job will not be deleted automatically.

1	Follow steps 1 through 8 in the above section.
2	When the title of the job to be printed is displayed
	(Agenda, in this example), press the ENTER key.
	Enter the four-digit access code entered in the printer
	driver and press the ENTER key.
		>Agenda
		Copies
			001

			3.4 e-MPS
3	Press the V key repeatedly until Delete appears for
	the number of copies.
		>Agenda
4		Delete
	Press the ENTER key. The private job is deleted from
	the hard disk.

Printing a code job

Install the KM-NET Job Manager software from the CD-ROM supplied with the printer. To do this, from the CD-ROM Main Menu, select Printer Utilities > Install KM-NET Job Manager.

1		Browse through Windows Start > Programs >
		KYOCERA MITA > KM-Net > Job Manager.
2		Enter the password for the software. Job Manager
		will start.
3		Click the Add printer icon (below). Select the
		Local or Network port.
		If you use the local parallel port to connect to
		the printer, make sure that the printer driver is
	Note	set to print to a local port. To check this out,
		click the Details tab of the printer Properties,
		and note the Print to the following port setting.

Add printer icon

	Figure 3-5
4	Follow the wizard until the Select printer dialog
	box is reached. When the printer is found in the

Printer List, click (highlight) it, then Finish.

3-23