Kyocera C8026N manual Staple Off, Staple ? Off, Punch

3.13 Other Modes

6	Press the U or V key repeatedly until >>Staple
	appears.
		>>Staple
			Off
7
	Press the ENTER key. A blinking question mark (?)
	appears.
		>>	Staple
		? Off
8
	Press the U or V key to change Off to On.
9	Press the ENTER key.
10	To exit the menu selection, press the MENU key.

3.13.12 Punch Error Detection Setting

This setting is possible only when the PH-3B Punch Unit is installed on the optional DF-610/610 finisher unit. This setting controls whether or not the message Chad box full appears when the chad box on the punch unit becomes full.

When the chad box becomes full while this setting is On:

•Message is displayed and printing pauses. Printing resumes automatically when the chad box is emptied and

replaced back into the punch unit.

When the chad box becomes full while this setting is Off:

•Message is displayed, but printing continues without punching.

1	Press the MENU key.
2	Press the U or V key repeatedly until Others >
	appears.
		Others	>

3	Press the Z key.
4	Press the U or V key repeatedly until >
	Finishing Error > appears.
		>Finishing	>
		Error

5	Press the Z key.
6	Press the U or V key repeatedly until >>Punch
	appears.
		>>Punch
			Off
7
	Press the ENTER key. A blinking question mark (?)
	appears.
		>>	Punch
		? Off
8
	Press the U or V key to change Off to On.
9	Press the ENTER key.
10	To exit the menu selection, press the MENU key.

3.13.13Mixed Color/Monochrome Print Setting

The printer has four color printing drums and developers (cyan, magenta, yellow, and black). The workload for each of these components are even regardless of which color is being used to print a job. When the printer prints a job which contains color pages and monochrome pages mixed together, you can choose to optimize the life of cyan, magenta, and yellow components or to ensure performance throughput.

You can select from the following options:

Mostly Monochrome		The printer switches to deactivate cyan,
		magenta, and yellow developing components
		to optimize the life of these components. This
		option may reduce throughput performance.
Mostly Color		The printer does not switch to deactivate any
		developing component while printing
		black-only pages. This provides maximum
		printing performance.
Auto		The printer automatically switches between
		Mostly Monochrome and Mostly Color
		options by looking-ahead-first manner.
The default setting is Auto.
1	Press the MENU key.

3-64