Sensor |
| |
| Connector | |
Battery | Position 2 | |
Connector | ||
| ||
Connector | Position 1 | |
Valve | Battery Clip | |
|
Reinstall the Battery Clip - DC Models Only
NOTE: When installing the battery and battery clip, make sure the wire and connector are accessible to allow for future connection.
With the battery clip angled slightly, insert it into the faucet body as shown above.
Engage one side of the battery clip into the left tab on the inner wall of the faucet body.
Press down firmly to snap the clip into the other tab. Verify that the clip is resting against the wall of the faucet body.
Proceed to the ″Reassemble the Faucet″ section.
Kohler Co. | 15 |