Screw
Solenoid Unit
BatteryO-Ring
O-Ring
Service the Solenoid
NOTE: Disassemble the faucet following the steps in the ″Disassemble the Faucet″ section.
Disconnect the wire connector and set the faucet body aside.
Remove the two mounting screws using a Phillips screwdriver.
Remove the solenoid unit.
Position the new solenoid unit. Make sure the
Tighten the two mounting screws using a Phillips screwdriver. Proceed to the ″Reassemble the Faucet″ section.
Kohler Co. | 13 |