Kohler k-10951 Troubleshooting Guide cont, D. The, Symptoms, Probable, Recommended Action, Causes

Troubleshooting Guide (cont.)
Symptoms	Probable			Recommended Action
	Causes
	C.	There is		C.	Remove the spout and check
		water			for corrosion on the
		leakage on			connections between the battery
		electrical			to solenoid and the solenoid to
		components			sensor. If possible, clean the
		or			terminals. If unable to repair
		connectors.			the connection, order a new
					sensor assembly or solenoid
					assembly, as required. Inspect
					the O-ring on the valve for
					cuts, debris, etc. If the O-ring is
					damaged, order a new O-ring.
					The origin of the leak must be
					investigated and repaired.
	D. The			D. Remove the spout and replace
		battery life			the battery. The spout requires
		has			a standard 6 Volt lithium
		expired.			battery. This item is not
					available from Kohler but can
					be purchased at many stores
					locally.
2. No water	A.	The AC		A.	Plug the AC wall brick firmly
flow (AC).		unit is not			into a working outlet.
		plugged
		in.
	B.	The		B.	Check that the breaker for the
		ground			circuit used by the faucet is on.
		fault
		breaker is
		tripped.
	C.	There is a	C.		Remove the spout and check
		loose			the connection from the AC
		connection.			unit to the solenoid and from
					the solenoid to sensor. Make
					sure that the connector arrows
					are aligned and that the
					connection is secure.
	D. The wires		D. Remove the spout and verify
		are			that the wires are tucked inside
		pinched or			the spout before reassembling.
		damaged.			If wires are cut or damaged,
					order new solenoid or sensor
					assembly.
Kohler Co.		19			1025498-5-H