Kohler k-10950, k-10951 manual Adjust the Water Temperature, For Handle Installations

Cleaning		Tab Edge
Strap		Limit
		Stop
		Handle
Handle		Right Tab
		Stop
Screw	Limit	Housing Setscrew
	Stop

Vandal-Resistant

Plug Button

Adjust the Water Temperature

CAUTION: Risk of personal injury. Scalding may result if the limit stop is not reinstalled properly.

NOTE: The water temperature does not need to be adjusted if the water temperature is below 105°F (41°C).

NOTE: Use a thermometer rated for 120°F (49°C) or greater.

NOTE: When using a tempered water supply, install the vandal-resistant plug button.

For Handle Installations

Turn on the water and adjust to the full hot position by turning the handle toward the back of the faucet until it stops.

Determine the temperature using a thermometer. If the temperature exceeds 105°F (41°C), complete the following steps.

Turn the handle until vertical.

Attach the cleaning strap over the sensor.

Remove the handle screw using the supplied 2.5 mm hex wrench.

Remove the handle and the limit stop.

Remove the limit stop from the handle splines.

1025498-5-H 4 Kohler Co.