Kohler k-10950 Troubleshooting Guide cont, Symptoms, Probable, Recommended Action, Causes, D. The

Troubleshooting Guide (cont.)
Symptoms		Probable		Recommended Action
		Causes
7.	Constant	A.	The	A.	Turn off the water supply and
	water flow		diaphragm		purge the faucet. Remove the
	(Either AC or		seal dirty		valve front plate and check the
	DC).		or		diaphragm and surrounding
			damaged.		area for debris. Clean out any
					debris. If the diaphragm is
					damaged, order a replacement.
		B.	The	B.	Remove the spout and
			solenoid is		solenoid. Check the solenoid
			plugged.		holes for debris.
		C.	The	C.	Remove the spout and
			solenoid is		solenoid. Replace the solenoid.
			does not
			work.
		D. The		D. Turn off the water supply and
			filter(s) are		disconnect the fittings from the
			plugged.		flex hoses. Remove the filter
					cartridges from both supplies.
					Clean all debris from the
					screens and replace them in the
					unit.
8.	Sporadic	A.	The faucet	A.	Verify that the faucet is
	water flow.		is installed		mounted flat to the deck
			at wrong		surface and that the sensor eyes
			angle to		are aligned to the user area.
			deck or		Ensure that the faucet is
			misaligned		installed in a position that is
			with user		above the rim of the lavatory.
			area.
		B.	The wires	B.	Remove the spout and verify
			are		that the wires are tucked inside
			pinched or		the spout before reassembling.
			damaged.
9.	Water is	A.	The valve	A.	Order a new O-ring for the
	dripping on		O-ring is		valve and install.
	deck		missing,
			cut, or
			damaged.
1025498-5-H				22	Kohler Co.