Troubleshooting
In case of trouble with the unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your dealer or TEAC service center.
Amplifier
No power
eCheck the connection to the AC power supply.
No sound from speakers.
eCheck the connection to the speakers. eAdjust the volume.
eSelect proper source.
ePull out the headphone plug from PHONES jack. eIf muting is on, press the MUTING button.
The sound is noisy.
eThe unit is too close to a TV set or similar appliances. Install the unit apart from them, or turn them off.
Remote Control Unit
Remote control doesn’t work.
eIf the batteries are exhausted, change the batteries.
eUse remote control unit within the range (5m) and point at the front panel.
eClear obstacles between the remote control unit and the main unit.
eIf a fluorescent light is near the unit, turn it off.
Tuner (FM/AM)
Cannot listen to any station, or signal is too weak.
eTune in the station properly.
eIf a TV is near the unit, turn it off.
eInstall the antenna again after locating the best reception position.
eAn external antenna is recommended.
Though the broadcast is stereo, it sounds monaural.
ePress the FM MODE button.
DAB tuner
No sound.
eEnsure that the
‘NO stations Available’ appears on the display.
eCheck that antenna is connected (see page 7). eEnsure that DAB coverage exists in your area.
Cannot access secondary services.
eAt the time of publishing not many secondary services are available, this will increase as more DAB stations start broadcasting. If a secondary service station is available, the secondary indicator >> will be displayed next to the station name.
Display goes out or displayed ‘service off air’.
eThis may occur if a broadcaster changes the label of a service or removes a label whilst you are listening to it. The
Cannot listen to the selected station.
eEnsure you have pressed the ENTER button when you want to listen to your selection. The station you are currently listening to will be displayed on the first line of the display, as you scroll through the station order list the second line will show other station options. Press the ENTER button to activate your selection.
A burbling sound is heard on some stations.
eDAB like other digital media is good at producing quality audio from a low level signal, however if this signal level is too low a ‘burbling’ sound can sometimes be heard. To reduce this, try repositioning your antenna to gain maximum signal strength.
38
