Teac 9A10001300 CR-H250 owner manual Pause J, FUNCTION, FM Mode, Power

HPAUSE (J), FUNCTION, FM MODE

In CD mode, use this button to pause playback.

In DAB mode, activates features such as station order, manual tune, DRC value, SW version indication, signal error rate. It is also possible to ‘tidy’ the station list to remove stations which are in the memory but have no service provided.

In FM mode, use this button to select stereo or monaural.

IPLAY (y), BAND

In CD mode, use this button to start playback.

In TUNER mode, use this button to select FM, AM or DAB.

JTUNING MODE, ENTER/SET

In FM or AM mode, use this button to select the tuning mode.

In DAB mode, use this button to enter the selection.

While setting the timer or the clock, use this button to set the time.

KPROGRAM, MEMORY

In CD mode, use this button to enter the program mode. In program mode, use this button to enter the selection.

In TUNER mode, use this button to memory the station manually.

LTIMER

Use this button to turn on or off the timer function.

MTIME MODE

Use this button to adjust clock and to set timer.

NTONE, BAL, DIMMER

Use this button to adjust the tone, balance and dimmer together with the VOLUME/SELECT knob.

OInput selector

Use these buttons to select a source.

PPHONES

For private listening, insert the headphones plug into this jack, and adjust the volume by turning the VOLUME/SELECT knob.

QPOWER

Press this button to turn the unit on or standby. The standby indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off.

The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the STANDBY position.

If the R-H300mk@is connected to the CR-H250 with a remote control cord, you can switch ON/standby both the CR-H250 and the R-H300mk@by pressing the POWER button of the CR-H250.

9