MS30H/MS30E MIXER —TROUBLESHOOTING (MIXER/MOTOR)
TABLE 9. MIXER TROUBLESHOOTING
SYMPTOM | POSSIBLE PROBLEM | SOLUTION | |
|
|
| |
| Worn or defective | Replace | |
Blades will not rotate. |
|
| |
| Adjustment lever | Check position of adjustment lever. Adjust if necessary. | |
|
|
| |
Material leaking from drum | Worn or defective paddle shaft | Replace seals. | |
ends. | seals? | ||
| |||
|
|
| |
| Defective or worn drum support | Apply grease to bracket or replace. | |
Drum difficult to discharge (tilt) | brackets? | ||
| |||
|
| ||
| Blades adjusted too tight. | Adjust blades until they almost touch side walls of drum. | |
|
|
|
TABLE 10. ELECTRIC MOTOR TROUBLESHOOTING
SYMPTOM | POSSIBLE PROBLEM | SOLUTION | |
|
|
| |
| No voltage to motor? | Check power source. | |
|
|
| |
Blades will not rotate. | Defective extension cord? | Replace extension cord. | |
|
| ||
Defective motor ON/OFF switch? | Replace switch. | ||
| |||
|
|
| |
| Defective motor windings? | Repair windings or replace windings. | |
|
|
|
MQ STOW MS30H/MS30E MIXER — PARTS & OPERATION MANUAL — REV. #4 (08/10/06) — PAGE 31
