Troubleshooting

The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer.

Images aren't projected on the screen.

Problem

Cause and solution

 

 

Power isn't turned on.

• Check the states of the indicators.

 

 

POWER

STATUS

Solution

 

 

 

 

 

 

 

 

 

 

 

 

Connect the power cord to the projector.

 

 

Off

Off

Plug the power cord into a wall outlet.

If any objects are blocking the air inlet or outlet grille, remove them and carry out the following.

Off

1. Unplug the power cord from the wall outlet.

2. Make sure that the projector has cooled off.

3.Plug the power cord into the wall outlet.

4.Press the POWER button.

If any objects are blocking the air inlet or outlet grille, remove them.

 

 

 

Don't expose the air outlet grilles to hot air emitted from a heating appliance.

 

 

 

Steady red Blinking

Check whether the filter is clogged with dirt or dust.

orange

Clean the filter, if clogged. (See page 25.)

After the STATUS indicator stops blinking, press the POWER button.

If you unplug the power cord while the fan is rotating, the lamp may not turn on about one minute

Blinking

when you plug the power cord next time.

green

The lamp can't turn on again for one minute after it goes out.

Press the POWER button several times.

 

 

 

 

 

 

 

 

 

 

Replace the lamp. (The lamp is at the end of its life.)

 

 

 

 

 

 

Steady red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attach the lamp cover on the bottom.

 

 

 

 

 

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

Unplug the power cord from the wall outlet and contact your dealer.

 

red / green

 

 

 

 

 

Steady

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Images aren't projected

• Remove the lens cap.

on the screen.

• The lamp sometimes takes about one minute to light up.

On rare occasion, the lamp fails to light up. In such cases, wait a few seconds and try to light the lamp again.

If the projector was turned off before the lamp cooled down completely, the fans may start rotating and the POWER button may not function when you plug the power cord into the wall outlet next time. Wait for the fans to stop and press the POWER button to turn on the lamp again.

Set SCART INPUT in the FEATURE menu to OFF. (See page 18.)

Check that the filter is clean. (See page 25.)

Check that the lamp cover are closed.

Check that the cable connected to the external device isn't broken.

When an extension cord is being used, replace it with the supplied cable and check whether images are projected correctly. If images are projected correctly, use an RGB signal amplifier along with the extension cord.

Images suddenly

• The air inlet or outlet grille may be blocked. (In such cases, the STATUS indicator blinks

disappear.

green.)

 

Remove the objects blocking the air inlet or outlet grille and carry out the following.

 

1.

Wait for the air inlet or outlet fan to stop (or wait for the STATUS indicator to go out.)

 

2.

Unplug the power cord from the wall outlet.

 

3.

Wait about 10 minutes.

 

4.

Plug the power cord into the wall outlet.

 

5.

Press the POWER button.

 

• When the STATUS indicator is blinking red, it is indicating that the lamp should be

 

replaced. Replace the lamp in this case.

 

 

"NO SIGNAL" is

• Turn on the power of the connected device, or check whether there is something wrong

displayed.

with the connected device.

 

• Check whether the external device outputs signals. (Check this especially when the

 

external device is a notebook computer.)

 

• Check that the cable connected to the external device isn't defective.

 

• Check that the projector is connected to the external device using the correct terminals.

 

• Check that the connected device is correctly selected as the input source.

 

• When an extension cord is being used, replace it with the supplied cable and check

 

whether images are projected correctly. If images are projected correctly, use an RGB

 

signal amplifier along with the extension cord.

EN – 26

Page 26
Image 26
Mitsubishi Electronics HC3 user manual Troubleshooting, Images arent projected on the screen

HC3 specifications

Mitsubishi Electronics HC3 is an advanced home entertainment system that exemplifies cutting-edge technology and user-friendly design. Designed for those who appreciate high-quality audio and video experiences, the HC3 blends functionality with aesthetic appeal, making it an ideal choice for modern living spaces.

One of the standout features of the HC3 is its superior display technology. The system integrates a high-definition LCD screen, providing a stunning resolution that allows viewers to experience their favorite movies and shows in vibrant detail. Coupled with advanced image processing capabilities, the HC3 ensures that colors are rich and true to life while minimizing motion blur, making it perfect for action-packed films and sports.

Audio performance is another focal point of the HC3. It is equipped with a multi-channel sound system that delivers immersive surround sound, creating a captivating audio environment. This system supports various sound formats, including Dolby Digital and DTS, enabling viewers to fully appreciate the audio depth and nuance of their media. The HC3 also features built-in equalization settings, allowing users to customize their audio experience according to their preferences and room acoustics.

Connectivity is critical in today’s digital landscape, and the HC3 excels in this regard. The system comes with multiple HDMI ports, USB inputs, and wireless connectivity options, including Bluetooth and Wi-Fi. This extensive connectivity enables users to easily link their smartphones, tablets, or other devices, facilitating seamless media playback from various sources. Additionally, the HC3 supports popular streaming services, offering users access to a universe of content without the need for extra equipment.

Ease of use is another hallmark of the Mitsubishi Electronics HC3. The intuitive interface simplifies navigation, allowing users to access their favorite shows and settings quickly. The remote control is thoughtfully designed, featuring backlit buttons for easy operation even in low-light conditions.

In terms of energy efficiency, the HC3 doesn’t disappoint. The system incorporates energy-saving technology that minimizes power consumption while maintaining high performance. This eco-friendly design not only benefits the environment but also helps reduce utility bills.

In summary, the Mitsubishi Electronics HC3 is a sophisticated entertainment solution that combines state-of-the-art display and audio technologies with user-friendly features. Its attention to connectivity and energy efficiency further establishes it as a premier choice for those seeking an immersive home theater experience while being mindful of their ecological footprint.