Drain

Samsung recommends a standpipe in height of 65cm. The drain hose must be connected through the hose clip to the standpipe, and the standpipe must fully cover the drain hose.

Flooring

For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine to move slightly during the spin cycle.

CAUTION: Do NOT install the washing machine on a platform or a poorly supported structure.

Water temperature

Do not install the washing machine in areas where water may freeze as the washing machine always retains some water in its water valves, pumps, and/or hoses. Frozen water left in the connection parts may cause damage to belts, the pump, and other components of the washing machine.

Alcove or closet installation

Minimum clearance for a stable operation:

Sides

25 mm

Rear

50 mm

 

 

 

 

Top

25 mm

Front

500 mm

 

 

 

 

If both the washing machine and a dryer are installed in one location, the front of the alcove or closet must have at least 500 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.

English - 13

02 INSTALLLATION

WW90H7600EW-03403K-07_EN.indd 13

2016/2/5 15:54:18

Page 13
Image 13
Samsung WW80H7400EW/EE, WW90H7400EW/EE, WW90H7600EW/EE Drain, Flooring, Water temperature, Alcove or closet installation