Kyocera C8026N manual Operating the Storage Device, Using the Memory Card

Press the Z key.

Press the Z key.

3.9 Operating the Storage Device

3.9Operating the Storage Device

The printer supports three types of storage device: memory card, option hard disk (HD-10), and RAM disk. The memory card and option hard disk are installed into the dedicated slots of the printer. The RAM disk is an allocated part of the printer’s memory. If the optional hard disk is installed in the printer, the e-MPS function will be available. For details, see e-MPS on page 3-20.

The basic operations of each storage device are the same. This section mainly explains the operation of the memory card.

3.9.1Using the Memory Card

3

4 Press the U or V key repeatedly until >Format appears.

>Format

5 Press the ENTER key. A question mark (?) appears.

>Format ?

The printer is equipped with a slot for a memory card. By inserting a memory card into the printer, the following operations become available.

•Formatting Memory Card

•Reading Font Data

•Reading Data

•Writing Data

•Deleting Data

•Printing a List of Data Names

For details about the handling of the memory card, see A.3.1 Memory Card on page A-5.

Formatting a memory card

A new memory card must be formatted before it can be used in the printer. Formatting allows data to be written to the memory card.

	• Formatting will destroy any existing data
	on a storage device including a used
Note	memory card.

•Formatting of the memory card must be executed from the printer.

To format a memory card, proceed as follows. When a new memory card is inserted in the printer's slot, Format error Memory card will appear on the message display.

1	Press the MENU key.
2	Press the U or V key repeatedly until Memory
	Card > appears.
		Memory Card	>

6	Press the ENTER key. Processing appears and
	formatting of the memory card starts.

Reading font data

In case of a memory card if a memory with the font data card is already inserted into the slot when the printer is turned on, the fonts are automatically read into the printer. To read fonts into the printer from a memory card, proceed as follows.

1	Press the MENU key.
2	Press the U or V key repeatedly until Memory
	Card > appears.
		Memory Card	>

3

4 Press the U or V key repeatedly until >Read Fonts appears.

>Read Fonts

5 Press the ENTER key. A question mark (?) appears.

>Read Fonts ?

3-42