Kyocera C8026N manual Color/Mono. mix, Color Registration, Print Regist Chart ?

3.13 Other Modes

2	Press the U or V key repeatedly until Others >
	appears.
		Others >
3
	Press the Z key.
4	Press the U or V key repeatedly until >Color/
	Mono. mix appears.
		>Color/Mono. mix
5
	Press the ENTER key. A blinking question mark (?)
	appears.
				>Color/Mono. mix
		? Auto
6
	Press the U or V key to select the setting you want.
7	Press the ENTER key.
8	Press the ENTER key. This display returns to Ready.

3.13.14 Color Registration

Perform the following procedure for color registration in case of color shear.

		A Color Registration Correction Chart will be
		printed out in A3 size paper when performing
	Note	the procedure for color registration. Set A3 size
		paper into paper cassette before proceeding.
1		Press the MENU key.
2		Press the U key repeatedly until Others > appears
		in the message display.
3		Press the Z key.
4		Press the U key repeatedly until >Color
		Registration > appears.

>Color >

Registration

5	Press the Z key.
6	>>Print Regist Chart appears.
		>>Print
		Regist Chart
7
	Press the ENTER key. A question mark (?) appears.
		>>Print
		Regist Chart ?
8
	Press the ENTER key. A Color Registration
	Correction Chart (shown) will be printed out.

Calibration is done using the left (L), right (R) and horizontal (H) scales in cyan, magenta and yellow colors by adjusting corresponding values displayed in the following steps.

Figure 3-16

3-65