Kyocera C8026N Selecting the Output Stack, Reset Type Adjust ?, Stack Select Top tray F-down

4	Press the U or V key repeatedly until >Reset
	Type Adjust appears.
		>Reset Type
		Adjust
5
	To reset all custom paper types, press the ENTER
	key. A question mark (?) appears.
		>Reset Type
		Adjust ?
6
	Press the ENTER key. All customized paper types,
	including weight and duplex printing capability, will

be reset to the default. The display returns to Ready.

3.10 Paper Handling

3.10.11 Selecting the Output Stack

The Stack Select menu on the operator panel allows you to select either the top (face-down) tray or the face-up tray for the output stack. If the optional document finishe is installed, it can also be selected as an output stack.

1	Press the MENU key.
2	Press the U or V key repeatedly until Paper
	Handling > appears.
		Paper Handling >
3
	Press the Z key.
4	Press the U or V key repeatedly until >Stack
	Select appears.
		>Stack Select
			Top tray F-down
5
		To change the output stack, press the ENTER key. A
	blinking question mark (?) appears.
			>Stack Select
		? Top tray F-down
6
	Press the U or V key to toggle through the following
	output stacks:
	Top tray F-down
	The output stacks change to include the following
	when an optional document finisher (DF-600/610) is
	installed:
	Left tray F-up
	Tray # F-up
	Tray # F-down
7	When the desired output stack is displayed, press the
	ENTER key.
8	To exit the menu selection, press the MENU key.

3-55