Kyocera C8026N manual Perm. Code JOB Size 1550MB MPS Configuration, VMB Size 1550MB

4	Press the U or V key and select >e-MPS
	Configuration >.

3.4 e-MPS

4	Press the U or V key and select >e-MPS
	Configuration >.

5

6

>e-MPS > Configuration

Press the Z key.

Press the U or V key and select >>Perm. Code JOB Size.

>>Perm. Code JOB

Size 1550MB

5

6

>e-MPS > Configuration

Press the Z key.

Press the U or V key and select >>VMB Size.

>>VMB Size 1550MB

7	Press the ENTER key, the message display shows a
	blinking cursor (_).
		>>Perm. Code JOB
		Size
			1550MB
8
	Press the U or V key to increase or decrease,
	respectively, the value at the blinking cursor. Use the
	Zand Y keys to move the cursor right and left.
9	When the desired size is displayed, press the ENTER
	key.
10	Press the MENU key and the display returns to
	Ready.

Maximum space assigned to virtual mailboxes (VMB)

This changes the hard disk space for virtual mailboxes. You can change the maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size of free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded off in unit of 50 MB. For example, if the total hard disk space is 10 GB, the default size is 1550 MB.

1	Press the MENU key
2	Press the U or V key and select e-MPS >.
		e-MPS	>

3 Press the Z key.

7	To change the maximum size, press the ENTER key.
	The message display shows a blinking cursor (_).
		>>VMB Size
		1550MB
8
	Press the U or V key to increase or decrease,
	respectively, the value at the blinking cursor. Use the
	Z and Y keys to move the cursor right and left.
9	When the desired size is displayed, press the ENTER
	key.
10	Press the MENU key to exit the menu selection.

3-27