Kyocera C8026N manual 6 CA-33 Caster Kit, Hard Disk

A.3 General Description of Options

The following optional devices can be installed on the document finisher.

DF-600 DF-610

Punch Unit PH-3B	No	Yes	Punches holes as pages
			are output.
Booklet Folder Unit	No	Yes	Outputs pages with
BF-1			center folds.
Multi-tray Unit MF-1	Yes	Yes	User-specific output to
			five trays.
Table A-1

A.3.6 CA-33 Caster Kit

These casters are mounted at the bottom of the bottom feeder for moving or fixing the printer. The CA-31 is the regular casters that may be used for the standalone FS-C8008 series printers, including only the standard PF-30A paper feeder or PD-800 duplex unit. The CA-31B is the topple-resistant, heavy-duty caster kit. The CA-31B must be installed when the printer is installed with one or more extra paper feeders.

	The manufacturer is not liable for any damages
	or injuries that may be caused when the CA-31B
Caution	is not used to support the printer having more
	than one paper feeders.
	If the floor is delicate against casters, when
	this product is moved after installation, the
Note	floor material may be damaged.

Figure A-14

A.3.7 Hard Disk

The hard disk is used for saving print data. This is advantageous when printing multiple sets of copies, as high- speed printing is possible using the electronic sorting function. The hard disk is further required in order to use the e-MPS function. You can use the KM-NET Printer Disk Manager utility to keep track of the stored data. This software is included in the CD-ROM supplied with the printer.

The hard disk is inserted into the hard disk slot (HDD) on the back of the printer as shown in the illustration.

The hard disk must be formatted before the initial use. To format the hard disk, use the printer operator panel or the KM-NET Printer Disk Manager. Before you install the hard disk in the printer, power off the printer and unplug the power cord.

HDD Slot

Figure A-15

A-7