Thermador PRG36 WFL 2060 Washer Fault Codes, Possible Causes, Flashing, Program fault, Lights

B

WFL 2060 Washer Fault Codes

Fault	Possible Causes	Flashing	Program fault
		Lights	Occurred
Door open or	Door left open.	○ Door locked
won’t lock	Faulty door latch or door lock	○ Rinse/Spin	Wash
		● Wash
No water filling	Water shut off.	○ Door locked	Wash
	Inlet strainer filters blocked.	● Rinse/Spin
	Water pressure too low (<1 bar)	○ Wash
No heating	Fault heater.	○ Door locked		Test
	Voltage too low.	● Rinse/Spin
	Excessive scale on heating element.	● Wash
No draining	Blocked sensor.	● Door locked	Wash
	Faulty water level controlled.	○ Rinse/Spin
	Faulty or blocked drain pump.	○ Wash
Motor won’t run	Faulty speed control.	○ Door locked		Test
	Triac short-circuited.	● Rinse/Spin
	Faulty reversing relay.	○ Wash
Overheating	Faulty control module.	● Door locked		Test
		● Rinse/Spin
		○ Wash
NTC failed (short	Faulty wire harness.	● Door locked
or open circuited)	Faulty NTC.	● Rinse/Spin		Test
		● Wash

46