Thermador PDR48, PRG48, PRG30, PRG36, PDR30 Thermador, Error Code, Light Sequence Code, Description

Thermador®

Thermador

Professional Ranges Models: PDR30/36/48…PRG30/36/48

The control continuously monitors system parameters for control and oven failures and reports a fault code when a system problem is detected. The control utilizes the ovens blue “on light” and oven “heating light” to report a detected fault code. The control will continue to flash the lights in the appropriate sequence as long as the fault exists.

Detection of a fault does not hinder the ability of the control to continue to function if the fault is not critical for the intended operation. For example: If the range door latch is inoperative, the range will continue to cook since the fault would only prevent the range from self-cleaning.

ERROR CODE	LIGHT SEQUENCE CODE	DESCRIPTION
E1	22	EEPROM ERROR
E2	01	CONTROL NOT CALIBRATED
E3	10	SENSOR OPEN
E4	12	SENSOR SHORTED
E5	21	POTENTIONMETER FAILURE
E6	32	OVER TEMPERATURE-COOKING
E7	23	OVER TEMPERATURE-CLEANING
E9	43	NO COOLING FANS
E11	44	DOOR LATCH FAULT
E12	11	EXP. BOARD NOT CONNECTED
E13	13	VCC LIFT OFF ERROR
E14	55	SELECTOR SWITCH ERROR

1