Thermador®
Thermador ESC30 and GSC30 30 inch range error codes
Error Codes | Causes | Example | Corrective Action | |
F6 | Missing APPLIANCE | If 60 cycles is missing for one | Cancel key will reset | |
| CHASSIS line cycle | minute |
| |
| detector |
|
| |
F7 | Function key stuck or | Stuck key | Must power down to clear this error. If key | |
shorted | remains stuck, replace clock assy. | |||
|
| |||
|
|
|
| |
F8 | Analog/Digital supervisory | Will cancel cook mode | Reset with cancel key, if persists, replace clock | |
assy. | ||||
|
|
| ||
|
|
|
| |
F9 | Door latch supervisory | Will cancel clean mode | Check door latch if latch is OK, replace clock. | |
|
|
|
|
Note 1 | Oven sensors should measure 1050 |
| ohms at 75 degrees F. if the sensor |
| measures correctly (within 10%), |
| check each leg of the sensor to |
| ground and to each phase of the |
| electrical supply. If all checks OK, |
| check the contacts inside the molex |
| plug. If the spring contacts are bent |
| or crushed, the sensor will create |
| intermittent errors. |
20
