Thermador PRG30, PRG48, PRG36, PDR30 Thermador, C, CM and CJ Oven Error Code Messages…continued

Thermador®

C, CM and CJ Oven Error Code Messages…continued

Note 2	Oven sensor should measure 1050
	ohms at 75 degrees F. If the sensor
	measures correctly (within 10%)
	check each leg of the sensor to
	ground and to each phase of the
	electrical supply. If all checks OK,
	check the contacts inside the molex
	plug. If the spring contacts are bent
	or crushed, the sensor will create
	intermittent errors.
Note 3	The touch panel assembly uses
	electronic keys and a
	microprocessor to signal functions.
	The program is set to scan the
	electronic touch pads constantly,
	and if this process is interrupted the
	microprocessor will turn all of the
	keys on electronically. If these
	errors are noted, please turn off the
	power to the oven, check all of the
	harnesses on the touch panel and
	reset the power. This will usually
	clear the errors.

9