Thermador PDR36, PRG48, PRG30, PRG36, PDR30, PDR48 manual Thermador, Element Supervisor Enabled

Thermador®

S, SM, AND SMW Oven Error Code Messages – Updated 02/21/02

Error Code
Displayed	Probable Cause	Example	Corrective Action
F1	Element Supervisor Enabled	Main power/relay	Replace main power/relay board
		board
F1, F7	Poor Connection Between Display	Intermittent Sensor	Replace control head kit & main power/relay
	Head And Touch Panel	OR Main power/relay	board. See note 1.
		board
F2	Oven Temperature Detected Or Door	Intermittent Sensor Or	Check oven latch switches & door light are
	Light Coming On After 1 Hour Into	Main power/relay	operating properly. Check oven sensor from
	Self-Clean	board	molex plug on main power/relay board.
			Should read approximately 1050.
F3	Open oven sensor	Open Sensor Or	Check oven sensor from molex plug on main
		Circuit Wiring	power/relay board. Should read approximately
			1050 ohms at room temperature. See note 3.
			Check and make sure the temperature sensor
			plug on the main power/relay board is in place
			and not loose.

12