Thermador PDR30, PRG48, PRG30, PRG36, PDR36, PDR48 manual Thermador

Thermador®

CT and CMT Ovens with Dreefs Control Error Codes…continued

Error Codes	Causes	Example	Corrective Action
E8	Control bd	Remains in display oven	Replace control bd
		unusable
E9	Latch	Latch motor may run but	Replace latch in affected oven.
		switches do not cycle
E10	Control bd	Checksum error	Replace dreefs bd.
E11	Latch problem	Will not clean	Replace latch in affected oven.
E12	Latch problem	Will not clean	Replace latch in affected oven.
E13	Latch problem	Latch does not run	Check for voltage to latch motor.
E14	Latch problem	Loose latch switch	Check latch for proper operation.
E15	Control bd.	Remains in display oven	Replace dreefs bd.
		unusable

Note 1 Oven sensors should measure 1050 ohms at 75 degrees F. If the sensor measures correctly (within 10%), check each leg of the sensor to ground and to each of the electrical supply. If all checks OK, check the contacts inside the molex plug.

If the spring contacts are bent or crushed, the sensor will create intermittent demos.

11