
13Specifications
Specifications In Brief
The 750 specifications are detailed in brief and then subsequently in more detail. In the detailed version, we attempt to explain the significance of each specification.
The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the 750 reveal excellent results by any standards. Tested at 115V and 230V after a 10 minute warm up period.
Rated Power Output: | 750WRMS into 8S |
| (continuous, driven from |
............................................................................................... | 1300WRMS into 4S |
| (continuous, driven from |
Frequency Response: | 5Hz – 40kHz ±0.25dB |
Total Harmonic Distortion (THD+N) |
|
Typically: | 0.008%, @ 1kHz into 8S |
20Hz to 20kHz: | <0.040%, into 8S |
Voltage Gain: | 34.3dB |
Dynamic Headroom (rated with music): | >1.1dB |
Voltage Swing: | |
Maximum Current Output: | 160A |
Damping Factor: | >700, @ 1kHz into 8S |
Signal to Noise Ratio |
|
Rated Output (unweighted): | 100dB |
Input Sensitivity |
|
Unbalanced: | 1.5VRMS |
Balanced: | ±0.78VRMS |
Input Impedance |
|
Unbalanced: | 22kS |
Balanced: | 3.3kS |
Smoothing Capacitance: | 60,000µF |
Driver Stage: | Class A |
Output Stage: | Class A/AB |
Audio Inputs |
|
Unbalanced: | 1 RCA connector |
Balanced: | 1 XLR connector |
Audio Outputs: | 2 pairs of speaker binding posts |
Other Connections
1 x IEC AC mains input receptacle
1 x 3.5mm “mini” jack for master remote input (5 – 12V DC) 1 x 3.5mm “mini” jack for slave remote output (12V DC)
33