HP INTEGRITY RX3600 manual 210

Figure 6-15 8-DIMM Memory Carrier Board Slot IDs

0A

1A

0B 1B

24-DIMM Memory Carrier Load Order The 24-DIMM memory carrier has two sides labeled side 0 and side 1, each of which contain a memory board. The 24-DIMM memory carrier can contain up to six quads of memory. DIMM quads are loaded in order of size from largest to smallest capacity.

DIMM quads are loaded in a certain way to balance the memory capacity between the two sides of the memory carrier, starting with side 0. If you have more than two quads of memory to install, load the first quad into slots 0A-0D of side 0, and load the second quad into slots 0A-0D of side

1.For the third and remaining quads of memory see “Memory Loading Rules and Guidelines” (page 211).

The DIMM slot IDS are the same for both 24-DIMM memory carrier boards. Unique slots are identified within the carrier by the side in which they reside. For example, slot 0A is identified as slot 0A, side 0; or slot 0A, side 1.

Figure 6-16shows the DIMM slot IDs for the 24-DIMM memory carrier board.

210 Removing and Replacing Server Components