Chapter 4: BIOS
Boot up Num-Lock
Set this value to allow the Number Lock setting to be modified during boot up. The options are On and Off.
PS/2 Mouse Support
Set this value to modify support for a PS/2 mouse. The options are Auto, En- abled and Disabled.
Wait for ‘F1’ If Error
Select Enable to activate the Wait for F1 if Error function. The options are Enabled and Disabled.
Hit ‘DEL’ Message Display
Select Enabled to display message to hit the DEL key to enter Setup. The op- tions are Enabled and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and Disabled.
OS Installation
Change this setting if using a
ACPI Version Features
Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI v2.0 and ACPI v3.0.
ACPI APIC Support
Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and Disabled.
ACPI OEMB Table
Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and Disabled.
Headless Mode
Use this setting to Enable or Disable headless operation mode through ACPI.
