VGA Enable/Disable
JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper set- tings.
JLAN Enable/Disable
Change the setting of jumper JPL1 to enable or disable the JLAN1 and JLAN2 Gb Ethernet ports. See the table on the right for jumper settings. The default setting is enabled.
I2C to PCI-X Slots Enable/ Disable
The JI2C1/2 pair of jumpers allows you to connect the System Management Bus to the
I2C to PCI-E Slots Enable/ Disable
The JI2C3/4 pair of jumpers allows you to connect the System Management Bus to the
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting |
| Definition |
Pins |
| Enabled |
| ||
Pins |
| Disabled |
| ||
|
|
|
JLAN1/2 Enable/Disable
Jumper Settings (JPL1)
Jumper Setting |
| Definition |
Pins |
| Enabled |
| ||
Pins |
| Disabled |
| ||
|
|
|
I2C to
Jumper Setting |
| Definition |
Pins |
| Enabled |
| ||
Pins |
| Disabled |
| ||
|
|
|
I2C to
Jumper Setting |
| Definition |
Pins |
| Enabled |
| ||
Pins |
| Disabled |
| ||
|
|
|