Pioneer How to Turn On AUX on Car Stereo System

Other Functions

Using the AUX source

This unit can control an auxiliary equipment such as VCR or portable device (sold sepa- rately). When connected, auxiliary equipment is automatically read in as AUX source and as- signed to AUX.

About AUX connection method

You have two methods to connect auxiliary equipment to this unit.

Stereo mini pin plug cable

When connecting auxiliary equipment using a stereo mini plug cable

%Insert the stereo mini plug into the AUX input jack on this unit.

For more details, refer to the installation man- ual.

IP-BUS-RCA interconnector

When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Inter- connector owner’s manual.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

Selecting AUX as the source

%Touch the source icon and then touch AUX to select AUX as the source.

# When the source icon is not displayed, you can display it by touching the screen.

Black plate (101,1)

Section

21

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 94.

Setting the AUX title

The title displayed for the AUX source can be changed.

1 After you have selected AUX as the source, press A.MENU button and touch FUNCTION and then touch EDIT.

2 Touch ABC to select the desired charac-
ter type.	Other
Touch ABC repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols	Functions
—alphabet (lower case)—European letters,
such as those with accents (e.g., á, à, ä, ç)
# You can select to input numbers and symbols
by touching 123.

3Touch a or b to select a letter of the al- phabet.

Each time you touch ait will display alphabet, numbers or symbols in ascending order (A B C ...). Each time you touch b it will display a letter in descending order.

4Touch d to move the cursor to the next character position.

When the desired letter is displayed, touch d to move the cursor to the next position and then select the next letter. Touch c to move backwards in the display.

En 101

<CRB2163-B>101