Pioneer AVH-P6850DVD operation manual Using the time alignment, Adjusting the time alignment

Digital Signal Processor

3Touch c or d to adjust the speaker out- put level.

Each time you touch cor d increases or de- creases the speaker output level. +10 to –10 is displayed as the level is increased or de- creased.

# The test tone rotates to the next speaker after about two seconds from the last operation.

4Touch STOP to stop the test tone out- put.

Notes

!If needed, select speakers and adjust their ‘ab- solute’ output levels. (Refer to Adjusting the speaker output levels on page 79.)

!To adjust the speaker output levels in this mode is the same as making the speaker out-

put levels at SPEAKER LEVEL. Both provide the same results.

Using the time alignment

Only when the multi-channel processor (e.g., DEQ-P7650/DEQ-P6600) is connected to this unit, you can operate this function.

The time alignment lets you adjust the dis- tance between each speaker and the listening position.

1Touch TIME ALIGNMENT on the DSP function menu.

2Touch any of the following touch panel keys to select the time alignment.

!INITIAL – Initial time alignment (factory set- ting)

!AUTO TA – Time alignment created by auto TA and EQ. (Refer to Auto TA and EQ (auto- time alignment and auto-equalizing) on page 84.)

Black plate (81,1)

Section

17

! CUSTOM – Adjusted time alignment that
you can create for yourself
! OFF – Turn the time alignment off
! ADJUST – Adjust the time alignment as de-
sired
# You cannot select AUTO TA if auto TA and EQ
has not been carried out.	Digital
# You cannot select ADJUST when neither
FRONT-L nor FRONT-R is selected in POSITION.	Signal
Adjusting the time alignment
You can adjust the distance between each	Processor
speaker and the selected position.
! An adjusted time alignment is memorized
in CUSTOM.

1Touch TIME ALIGNMENT on the DSP function menu and then touch ADJUST.

# You cannot select ADJUST when neither FRONT-L nor FRONT-R is selected in POSITION.

2Touch c or d to select the speaker to be adjusted.

Each time you touch cor d selects the speak- er in the following order:

FRONT-L (front speaker left)—CENTER (center speaker)—FRONT-R (front speaker right)— REAR-R (rear speaker right)—REAR-L (rear speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set at OFF.

3Touch c or d to adjust the distance be- tween the selected speaker and the listen- ing position.

Each time you touch cor d increases or de- creases the distance. 0.0 – 500.0 [cm] is dis- played as the distance is increased or decreased.

4Touch ESC to return to the playback dis- play.

En 81

<CRB2163-B>81