Pioneer Master Your AVH Subwoofer Settings: A Complete Initial Setup Guide

Black plate (94,1)

Section

20 Initial Setup

Adjusting initial settings

1

2

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Source icon

Shows which source has been selected.

2Function display

Shows the function names.

1Touch the source icon and then touch OFF to turn this unit off.

# When the source icon is not displayed, you can display it by touching the screen.

2Touch AUDIO MENU and then touch INITIAL to display the function names. The function names are displayed and oper- able ones are highlighted.

# To go to the next group of function names, touch NEXT.

# To return to the previous group of function names, touch PREV.

# To return to the previous display, touch BACK.

# To return to the display of each source, touch ESC.

94 En

Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 101.

%Touch AUX1/AUX2 on the initial menu to turn each auxiliary setting on.

# To turn auxiliary setting off, touch AUX1/ AUX2 again.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads out- put) can be used for full-range speaker (FULL) or subwoofer (SUB. W) connection. If you switch the rear output setting to SUB. W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speak- er connection (FULL). When rear output is connected to full range speakers (when FULL is selected), you can connect the RCA sub- woofer output to a subwoofer. In this case, you can select whether to use the subwoofer con- troller’s (low pass filter, phase) built-in SUB.W or the auxiliary FULL.

!When the multi-channel processor (e.g., DEQ-P7650/DEQ-P6600) is connected to this unit, you cannot operate this function.

1Touch REAR SP on the initial menu.

2Touch c or d on the REAR SPEAKER to switch the rear output setting.

Touch c to select full-range speaker and FULL appears in the display. Touch d to select sub- woofer and SUB. W appears in the display.

# When no subwoofer is connected to the rear output, select FULL.

<CRB2163-B>94