Pioneer AVH-P6850DVD Setup Introduction of setup adjustments, Setting the AV input

Setup

Introduction of setup adjustments

1

1Setup menu display

Shows the setup function names.

1Touch AUDIO MENU to display MENU. MENU appears on the display.

# You can also display MENU by clicking the joystick on the remote control.

2Touch SETUP to display the setup func- tion names.

The setup function names are displayed and operable ones are highlighted.

# To return to the previous display, touch BACK.

# To return to the display of each source, touch ESC.

Note

If you do not operate the setup function within about 30 seconds, the display is automatically re- turned to the source display.

Setting the AV input

You can connect up to two AV components to this unit and display videos either on AV source or EXT source.

Switch the AV input setting depending on the connected AV components.

Black plate (87,1)

Section

18

!Select VIDEO to watch video of a con- nected component as AV source.

!Select EXT-V to watch video of a connected video unit as EXT source.

!Select B. CAMERA to watch a rear view camera video while you are backing your vehicle.

When AV component is	Setup
connected to AV input 1

%Touch AV input on the setup menu to select the AV input 1 setting.

Touch AV input until the desired setting is se- lected.

!OFF – No video component is connected

!VIDEO – External video component (such as portable video player)

!EXT-V – External video unit (such as Pio-

neer products available in the future)

#EXT-V can be selected only when external video unit is connected to this unit.

When AV component is connected to AV input 2

1Touch AV INPUT 2 on the setup menu.

2Touch c or d on the AV INPUT 2 setting to select your desired setting.

Each time you touch cor d it switches be- tween the following AV input 2 settings:

!OFF – No video component is connected

!B. CAMERA – Rear view camera

!VIDEO – External video component (such as portable video player)

En 87

<CRB2163-B>87