Pioneer AVH-P6850DVD Initial Setup, Setting the FM tuning step, Setting the AM tuning step

Initial Setup

#When a subwoofer is connected to the rear output, set for subwoofer SUB. W.

#When the rear output setting is SUB. W, you cannot change the subwoofer controller.

3Touch c or d on the PREOUT setting to switch the subwoofer output or non fading output.

Touch c to select subwoofer output and SUB.W appears in the display. Touch d to se- lect non fading output and FULL appears in the display.

Notes

!Even if you change this setting, there is no output unless you turn the nonfading output (refer to Using nonfading output on page 72) or subwoofer output (refer to Using subwoofer output on page 72) in the audio menu on.

!If you change the subwoofer controller, sub-

woofer output and nonfading output in the audio menu return to the factory settings.

Setting the FM tuning step

The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.

%Touch FM STEP on the initial menu to select the FM tuning step.

Touching FM STEP will switch the FM tuning step between 50 kHz and 100 kHz. The se- lected FM tuning step will appear in the dis- play.

Note

If seek tuning is performed in 50 kHz steps, sta- tions may be tuned in imprecisely. Tune in the sta- tions with manual tuning or use seek tuning again.

Black plate (95,1)

Section

20

Setting the AM tuning step

The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable).

%Touch AM STEP on the initial menu to select the AM tuning step.

Touching AM STEP will switch the AM tuning

step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.	Initial
Changing languages for	Setup
CAUTION

Some operations on this unit are prohibited while driving or needs to be paid a careful at- tention when operating. In such case, a cau- tion appears on the display. You can change the language of the cautions at this setting.

%Touch CAUTION on the initial menu to select your desired language.

Each time you touch CAUTION, the language for CAUTION is switched.

Switching the sound muting/attenuation

Sound from this system is muted or attenu- ated automatically when the signal from the equipment with mute function is received.

!The sound is turned off, MUTE is displayed and no audio adjustments are possible.

!The sound is attenuated, ATT is displayed and no audio adjustments, except volume control, are possible.

En 95

<CRB2163-B>95