Section

21 Other Functions

5Touch OK to store the entered title in memory.

6Touch ESC to return to the playback dis- play.

Setting remote control code type

Changing the remote control operation switch to DVD mode enables you to operate the built- in DVD player with the supplied remote con- trol. There are three remote codes for DVD mode, code type A, code type B and code type AVH. However, when operating this unit, use the code type AVH only.

!With this unit, code A and B cannot be used.

1Set the remote control selection switch on the left side of the remote control to the appropriate position with a pen tip or other pointed instrument .

!If you select AVH mode, there is no need to take the following procedure.

!If you select A/B and if in case you need to operate other Pioneer units (may be avail- able in the future), take the following proce- dure and change the code type to the appropriate type.

2Press 0 and CLEAR on the remote con- trol simultaneously to change the code type.

Initially, the code type is set to A. Each time you press 0 and CLEAR simultaneously on the

remote control the code type switches be- tween A and B.

102 En

Black plate (102,1)

Using the preprogrammed function

You can operate the preprogrammed functions for each source by using PGM.

!In order to use PGM button for prepro- grammed function, the remote control op- eration mode switch should be set to AVH.

%Press PGM to turn pause on when se- lecting the following sources:

!DVD-VBuilt-in DVD player

!M-CDMulti-CD player

!iPod – iPod

!BT Audio – Bluetooth Audio

#To turn pause off, press PGM again.

%Press PGM and hold to turn BSM on when selecting TUNER as the source. Press PGM and hold until the BSM turns on.

# To cancel the storage process, press PGM again.

%Press PGM and hold to turn BSSM on when selecting TV as the source.

Press PGM and hold until the BSSM turns on.

# To cancel the storage process, press PGM again.

<CRB2163-B>102

Page 102
Image 102
Pioneer AVH-P6850DVD operation manual Setting remote control code type, Using the preprogrammed function, 102 En