Pioneer AVH-P6850DVD operation manual Additional Information Error messages, CRB2163-B105

Black plate (105,1)

Appendix

Additional Information

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.

	Message	Cause	Action (See)
ERROR-02	Dirty disc	Clean disc.
		Scratched disc	Replace disc.
		The disc is loaded upside down	Check that the disc is loaded correctly.
ERROR-05		Electrical or mechanical	Press RESET.
ERROR-A0		Electrical or mechanical	Consult your dealer or your nearest author-
			ized Pioneer Service Station.
DIFFERENT REGION DISC		The disc does not have the same re-	Replace the DVD video with one bearing the
		gion number as this unit	correct region number.
NON PLAYABLE DISC		This type of disc cannot be played	Replace the disc with one this unit can play.
		by this unit
TEMPERATURE PROTECTION		The temperature of this unit is out-	Wait until the unit’s temperature returns to
IN MOTION		side the normal operating range	within normal operating limits.
PROTECT		All the files on the inserted disc are	Replace disc.
		secured by digital rights manage-
		ment (DRM)
TRACK SKIPPED		The inserted disc contains WMA	Replace disc.
		files that are protected by digital
		rights management (DRM)

Additional Information

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again.

Message	Cause	Action
Error check MIC	Microphone is not connected.	Plug the supplied microphone securely into
		the jack.

Error check front SP, Error check FL SP, Error check FR SP, Error check center SP, Error check RL SP, Error check RR SP, Error check subwoofer

The microphone cannot pick up the ! Confirm that the speakers are connected

measuring tone of a speaker.	correctly.
	! Correct the input level setting of the power
	amp connected to the speakers.
	! Set the microphone correctly.

En 105

<CRB2163-B>105