Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message | Cause/solution |
Base no power | L The handset has lost communication with the |
or | base unit. Move closer to the base unit and try |
again. | |
No link. | L Unplug the base unit’s AC adaptor to reset the |
unit. Reconnect the adaptor and try again. | |
base AC adaptor. | L The handset’s registration may have been |
| canceled. |
Busy | L No cellular phone is registered to the base |
| unit. Register a cellular phone (page 15). |
| L The called unit is in use. |
| L Other units are in use and the system is busy. |
| Try again later. |
| L The handset you are using is too far from the |
| base unit. Move closer and try again. |
Call phone company for | L You have not stored the voice mail access |
your access # | number. Store the number (page 57). |
Check tel line | L The supplied telephone line cord has not been |
| connected yet or not connected properly. |
| Check the connections (page 8). |
| L If you do not connect the telephone line cord |
| and use only cellular lines, set the cellular line |
| only mode (page 17). |
Error!! | L Recording was too short. Try again. |
| L Someone is using a cellular line or headset, or |
| copying phonebook entries. Try again later. |
| L The phonebook copy is incomplete (page 47). |
| The cellular phone is disconnected from the |
| base unit. Make sure that other Bluetooth |
| devices are not connected to the cellular |
| phone, and try again. |
Failed | L Although the unit tried to connect to the |
| cellular phone or headset, the connection has |
| been failed. |
| – Someone is using a cellular line or headset. |
| Try again later. |
| – Make sure that the cellular phone or |
| headset is not connected to other Bluetooth |
| devices. |
62For assistance, please visit http://www.panasonic.com/help
