Pioneer AVH-P6850DVD operation manual Basic Operations Loading/Ejecting discs, Loading a disc

Black plate (20,1)

Section

05 Basic Operations

Loading/Ejecting discs

CAUTION

Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fin- gers.

Loading a disc

Up to six discs can be stored into this unit. Each disc is stored in each disc holder allow- ing you to specify a holder for loading a disc.

1Press OPEN on the unit to display load- ing/ejecting menu.

The LCD panel opens halfway, and the load- ing/ejecting menu is displayed on the screen.

!If the disc in the holder has already been played, the disc type is displayed on the holder icon (e.g. CD, DVD etc.).

!NO DISC is displayed for an empty holder.

2Touch LOAD next to the holder you want to insert a disc in.

The selected holder flashes. When READY is displayed, this unit becomes on standby to load a disc into the holder.

# If the holder has already loaded a disc, you need to eject the disc first. For details concerning about ejecting a disc, refer to Ejecting a disc on the next page.

3Insert a disc into the disc loading slot.

The disc is loaded into the selected holder.

20 En

Repeat these steps until you have done load- ing discs into this unit.

#To cancel loading the disc into the selected holder, touch CANCEL.

4To replace the LCD panel to the original position, press OPEN on the unit.

# When the automatic playback function is on, this unit will cancel the DVD menu and automati- cally start playback from the first chapter of the first title. Refer to Automatic playback of DVDs on page 32.

Notes

! The DVD player plays one, standard 12-cm disc at a time. Playing back an 8-cm disc is not possible with this unit. Playable disc and adapter are listed in the table below.

12-cm disc	8-cm disc	8-cm disc adapter
Ö	—	—

! Do not insert anything other than a disc into

the disc loading slot. Discs which can be played back are listed on Playable discs on page 8.

! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press OPEN and touch h to eject the disc, and check the disc for damage before insert- ing it again.

! If an error message such as ERROR-02 is dis- played, refer to Error messages on page 105.

! If bookmark function is on, DVD playback re- sumes from the selected point. For more de- tails, refer to Resume playback (Bookmark) on page 29.

! This unit does not automatically change discs even if it reaches to the end of the currently playing disc. To change discs, press aor b button (DISC) on the remote control.

<CRB2163-B>20