To Execute the Initialize Setup Data
Procedure:
1.Press the [MENU] button on the remote commander and then press the [CLEAR] button on the remote commander. The fol- lowing screen appears on the
Emg. History Check | 59min | ||
Laser Hours | CD | 999h | |
| DVD | 999h | 59min |
Initialize setup data...
[Next]Next page [Prev]Prev page [0]Return to Top Menu
2. The screen after a while returns to former display.
To Return to the Top Menu of Remocon Diagnosis Menu
Press the [0] button on the remote commander.
5. Checking Version Information
To check the version information, please follow the following pro- cedure.
Procedure:
1.From the top menu of Remocon Diagnosis Menu, select “4. Version Information” by pressing the [4] button on the remote commander. The following screen appears on the
Version information
Firm(Main): Ver. X.XXXX
Firm(Sub): XX.XX
RISC: XXXXXX
8032: XXXXXX
Audio DSP: XX.XX.XX.XX
Servo DSP: XX.XX.XX.XX
[0]Return to Top Menu
2.To return to the top menu of Remocon Diagnosis Menu, press the [0] on the remote commander.
SECTION 5
ELECTRICAL ADJUSTMENT
When the base unit is replaced, perform the adjustment and the measurement as shown below in this order.
EXECUTING IOP MEASUREMENT (See page 14)
16
