Pin No. | Pin Name | I/O | Description | ||
65 to 73 | No Use | O | Not used |
|
|
74 | KEY_INT | I | Wake up signal input terminal |
|
|
75 | LED_LAT | O | Serial data latch pulse signal output terminal | Not used | |
76 | No Use | O | Not used |
|
|
77 | PLL_IC_I2C_SDA | I/O | I2C |
| |
78 | PLL_IC_I2C_SCL | I/O | I2C data transfer clock signal input/output with the clock generator | ||
79 to 82 | No Use | O | Not used |
|
|
83 | CKSW | I | Chucking detection switch input terminal |
|
|
84 | OCSW | I | Disc table open/close detection switch input terminal | ||
85 | DAC_INT | O | Reset signal output to the D/A converter | "L": reset | |
86 | DAC_CS3 | O | Not used |
|
|
87 | DAC_CS2 | O | Bit clock signal output to the |
|
|
88 | DAC_CS1 | O | Chip select signal output to the D/A converter |
| |
89 | LED_PLAY | O | Play LED drive signal output terminal "H": LED on | ||
90 | LED_PAUSE | O | Pause LED drive signal output terminal | "H": LED on | |
91 | LED_HDMI | O | HDMI on/off LED drive signal output terminal | "H": LED on | |
92 | DESTINATION | I | Setting terminal for the destination |
|
|
93 | MODEL | I | Setting terminal for the model |
|
|
94, 95 | KEY2, KEY1 | I | Front panel key input terminal |
|
|
96 | AVSS | - | Ground terminal |
|
|
97 | KEY0 | I | Front panel key input terminal |
|
|
98 | VREF | I | Reference voltage (+3.3V) input terminal |
|
|
99 | AVCC | - | Power supply terminal (+3.3V) |
|
|
100 | No Use | O | Not used |
|
|
42