Motorola WS 2000 with AP 300 manual Security Settings, Configuring WPA/WPA2 TKIP through the CLI

Models: WS 2000 with AP 300

1 18

Page 14

Configuration Guide

Enable WPA/WPA2 security mode.

(when SpectraLink Wireless Telephones are configured for WPA- PSK)

To configure WPA-TKIP (PSK) as security option, use the following commands

admin>network

admin(network)>wlan admin(network.wlan)>set enc 1 tkip

admin(network.wlan)>save

14	PN: 1725-36066-001_D.doc

Image 14

Contents

WS 2000 with AP VIEW Certified Configuration GuideMotorola Copyright Notice Trademark InformationPatent Information Contact InformationCertified Product Summary Service InformationIntroduction Configuration Guide Access Point Capacity and PositioningKnown Limitations PN 1725-36066-001 D.doc Network TopologyMotorola WS2000 with AP Installing firmware through the CLI Configuration SettingsInstalling a new image Installing firmware through the Web interface Configuring radio settings through the CLI Setting the channelUser selection 9.Click the OK button 10.Click the Apply button Motorola WS2000 with AP Voice Prioritization Setting3.Click the Apply button PN 1725-36066-001 D.docSSID Settings Configuring SSID settings through the CLIMotorola WS2000 with AP PN 1725-36066-001 D.docadmin network Security SettingsConfiguring WPA/WPA2 TKIP through the CLI adminnetwork.wlan set tkip phraseMotorola WS2000 with AP PN 1725-36066-001 D.doc6.Click the Apply button admin network Configuring WPA2-CCMPthrough the CLIConfiguring WPA2-CCMPthrough the Web interface adminnetwork.wlan set ccmp phrase5.Enter the ASCII passphrase. Click the OK button Configuration Guide4.A warning dialog box will appear. Click Yes 6.Click the Apply button