Operation
Using the tools
1Make sure the vacuum is in the upright position.
2.Remove the hose from the hose base. This automatically diverts the suction to the hose. Unwrap the hose from the vacuum.
3.Use the hose alone or with the telescoping extension wand. Attach any of the tools to the end of the hose or to the end of the telescoping extension wand.
TurboBrush
Use rotating brush action for small areas such as stairs and upholstery.
Note: Press gently when using the TurboBrush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.
Combination brush
Use longer, soft bristles for dusting.
Remove long bristle portion and use shorter, stiff bristles when agitation is needed to remove debris.
Crevice tool
Use in tight narrow spaces
Telescoping extension wand
Use with desired attachment for a longer reach. To extend the wand, twist the collar to “Unlock” and push away from you. Twist the collar to “Lock” to lock into place. To retract, twist to unlock, pull toward you and twist to relock.
ATTENTION:
Always place the vacuum cleaner on the floor in its fully upright position when using tools. Placing the vacuum in this position automatically stops the rotating brush.
2
Tip:
Hair, string and small objects can block the vacuum hose or tools. Check them occasionally for obstructions.
CAUTION:
To avoid personal injury and to prevent the cleaner from falling when cleaning stairs, always place it at the bottom of the stairs.
168 w w w . b i s s e l l . c o m
